Actual aluminum-flake colors often used as base for 4600 Series Candy Colors.

Highly reflective – more so than 4300 Series silvers.

Best applied over 4002 Sealer Dark or an underlying coat of Auto Air, not direct to the substrate.

Aluminum Bases are may require a longer period to cure than what is required for most other Auto Air Colors due to coating used to prevent aluminum from gassing.

Use of mid-coat prior to aggressive masking for graphics may prevent peeling.

Mid-coat may be of a urethane inter-coat clear or Auto Air 4004 Transparent Base.

Use of mid-coat may not be necessary, especially if Aluminum Base Colors are thoroughly cured.

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.5mm tip or larger

Reduce: Spray Gun @ 10% per volume with 4011 Flash Reducer
Airbush @ 30% per volume or more with 4011 Flash Reducer