main body

4001 Auto Air Sealer White

A low-build sealer used as the initial application of Auto Air Colors. Has excellent coverage and adhesion to primers & prepared surfaces.

Works best with a 0.5mm airbrush operated at 45+ PSI or a 1.2mm tip-sized spray gun operated at 40 PSI.

Tint with 4200 Series Semi-Opaque or Transparent Colors to create a color-keyed sealer base to improve coverage of colors. The mix ratio is not specific. Mix colors approx. 25% per volume to tint sealer.

Dry-sand with 600 – 800 grit paper to create a smoother surface before applying colors.

Excellent adhesion direct to urethane, epoxy and lacquer primers.
Excellent adhesion to existing finishes, prepare by scuffing with 600 grit.
Excellent adhesion to prepared substrates; aluminum, fiber-glass, glass, wood, vinyl and ceramics.

Plastics - use an adhesion promoter first.
Bare, untreated metal – apply a DTM etch-primer follwed by 4001 Sealer White or 4002 Sealer Dark.

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 30% per volume or more with 4011 Flash Reducer


	4001 Sealer White tinted @ 25% with 4206 Flame Red to create a pastel red sealer base

	4206 Flame Red covers complete with 2 coats over the tinted sealer base

4002 Auto Air Sealer Dark

Dark grey sealer with same properties as 4001 Sealer White.

Use as initial coat for dark colors and for 4400 Series and 4500 Series Hot Rod Sparkle and Cosmic Sparkle Colors.

Sealer dark is not a black. Use 4220 Deep Black for black bases.

Silvers - mix Sealer Dark and White to create a lighter grey sealer base for 4100 Series Aluminum bases and 4300 Series silvers.

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip
Mini-Spray Gun: 1.0mm tip
Airbrush: 0.4mm or larger
Reduce: Spray-gun: @ 10% per volume with 4011 Flash Reducer
Airbrush: @ 30% per volume or more with 4011 Flash Reducer

4004 Transparent Base

Colorless base to all Auto Air Colors.

Reduces concentrated 4600 Series Candy Colors.

Use as inter-coat with minimal build. Although not necessary, Transparent Base can be used as a protective inter-coat. Apply in very light amounts when doing so and allow for extended drying time. Inter-coat of Transparent Base over coarse 4400 Series Gem and 4500 Series Hot Rod Sparkle Colors assists top-coat clear in bridging over colors’ pearl-flakes. A little goes a long way when using Transparent Base as an inter-coat clear. Apply it as a drop coat. Do not “paint” it on with any significant build-up of material.

Add to colors in any amount to increase transparency.

4007 Cleaner [top]

Used for cleaning airbrush in between color changes.

Does not damage internal parts of airbrush. May be substituted with water.

4008 Restorer [top]

Use as a soak bath for airbrush & spray gun parts after use.

Restorer dissolves and loosens Auto Air Colors after colors have cured and dried onto gun parts. Restorer makes cleaning easy.

Re-usable. Paint and contaminants fall to bottom of Restorer bath allowing for multiple uses.

4010 Flash Reducer - Medium Dry [top]

Reducer for the entire Auto Air Colors line.

Improves flow, decreases dry-tip and improves atomization of colors.

Does not accelerate curing times as does 4011 Flash Reducer.

Reduce colors approximately 10% per volume for use with spray guns and 25% or more per volume for use with airbrushes.

4011 Flash Reducer - Fast Dry [top]

Reducer for the entire Auto Air Colors line.

Decreases curing times by assisting water’s evaporation from color through a mild flashing of reducer’s co-solvent.
Improves flow, decreases dry-tip and improves atomization of colors.

Does not accelerate curing times as does 4011 Flash Reducer.

Reduce colors approximately 10% per volume for use with spray guns and 25% or more per volume for use with airbrushes.

For use with small tip-sizes of 0.3mm and less, some colors may be reduced in excess of 100% per volume.


	4011 Flash Reducer improves flow and leveling of all Auto Air Colors

Auto Air Colors and its corporate likeness are trademark protected identities of Createx Distribution, LLC.
© 2007 AutoAir Colors